You are here:  > 

Amgueddfa Cymru - National Museum Wales

Collectors & Collections

July 2012

Self Assembly of a Victorian Oven

Posted by Phil Tuck on 1 July 2012

[image: The oven on arrival from St. Fagans National History Museum]

The oven on arrival from St. Fagans National History Museum

[image: Worse for wear]

Worse for wear

[image: Llwyn-yr-Eos Farmhouse at St. Fagans, where the oven was removed for conservation by Phil Tuck]

Llwyn-yr-Eos Farmhouse at St. Fagans, where the oven was removed for conservation by Phil Tuck

[image: Fixings and fastenings]

Fixings and fastenings

» View full post to see all images

Working for Amgueddfa Cymru as part of the conservation team at the National Collections Centre, Nantgarw, certainly has its challenges. This was definitely the case when we received a request from the Historic Buildings Unit based at St Fagans - National History Museum to help assemble an oven. I assumed this would probably involve a few screws and washers, and just a few hours’ work.

I remember the lorry arriving at Nantgarw with two large pallets on board. One contained burnt, broken and whole pieces of mainly cast iron components from the old oven; the second pallet held the components of the new oven. Even at first glance, there appeared to be far more pieces of the newly cast material. With the help of photographs taken of the old oven before dismantling all the parts were laid out, matching old with new; it took me three days!

The oven had been removed from Llwyn-yr-Eos farmhouse at St Fagans which dates from about 1820. The building had been closed to the public for conservation work to be carried out; this provided an opportunity to replace the late Victorian oven, which was definitely the worse for wear.

After identification came assembly. I decided to start by making two new mild steel inner walls. This was done with the help of Len Howells, the fabricator at Big Pit - National Coal Museum. These would then act as a framework to which I would attach the new oven parts.

The old oven components were fastened together using rivets, large and small, both dome and flat head, and machine screws. As the new oven was made of new cast iron, which is very brittle, I was naturally very apprehensive about using a hammer to carry out any riveting, especially as some of the pieces were only a few millimetres thick. I also took into consideration the fact that they were very costly to produce! I decided to address this problem by manufacturing artificial rivets. This was done by using the lathe to machine the heads of bolts. I ground the cutting tool to the exact shape of the dome required. The flat head rivet was cut using a normal cutting tool.

The bolts now had threads, but with rivet heads. The pieces that needed riveting would be held together by having a clearance hole drilled into the top plate and a tapping hole drilled into the piece to be fastened to it. When a thread needs to be cut in a hole a tool called a tap is used; this process is referred to as “tapping a hole”.

Every component of the new oven came without holes for the relevant fastenings, so measurements of every hole had to be taken from the old pieces, some of which were broken, and transferred to the new. Once this had been done, the dummy rivets were screwed into the tapped holes, the parts were tightened together and the excess thread then cut off.

Turning to the machine screws, I managed to source sufficient examples with slotted countersunk heads and a Whitworth thread. The Whitworth thread was created by Joseph Whitworth in 1841 after standardising a number of contemporary threads and was known as the British Standard Whitworth thread, BSW for short; it was only superseded by the metric thread in the early 1970s. Modern-day machine screws would have been incongruous to the oven, with their hexagonal head slots and metric thread.

Using these fastenings, the new oven was methodically assembled and fully constructed in the workshop at Nantgarw. It was then taken apart and secured onto a pallet, which the Historic Buildings unit then collected. It is now back in place in the farmhouse and has already baked a few loaves!

So a task which I thought might mean a few hours’ work involved the building of an oven comprising 94 separate parts, the drilling and tapping of 132 holes and machining of 88 bolts to look like rivet heads eventually took me five weeks…..so much for a few hours work!!

Phil Tuck, Conservation Officer, Dept. of Industry, Nantgarw.

  • National Museum Cardiff

    [image: National Museum Cardiff]

    Discover art, natural history and geology. With a busy programme of exhibitions and events, we have something to amaze everyone, whatever your interest – and admission is free!

  • St Fagans National History Museum

    [image: St Fagans]

    St Fagans is one of Europe's foremost open-air museums and Wales's most popular heritage attraction.

  • Big Pit National Coal Museum

    [image: Big Pit]

    Big Pit is a real coal mine and one of Britain's leading mining museums. With facilities to educate and entertain all ages, Big Pit is an exciting and informative day out.

  • National Wool Museum

    [image: National Wool Museum]

    Located in the historic former Cambrian Mills, the Museum is a special place with a spellbinding story to tell.

  • National Roman Legion Museum

    [image: National Roman Legion Museum]

    In AD 75, the Romans built a fortress at Caerleon that would guard the region for over 200 years. Today at the National Roman Legion Museum you can learn what made the Romans a formidable force and how life wouldn't be the same without them.

  • National Slate Museum

    [image: National Slate Museum]

    The National Slate Museum offers a day full of enjoyment and education in a dramatically beautiful landscape on the shores of Llyn Padarn.

  • National Waterfront Museum

    [image: National Waterfront Museum]

    The National Waterfront Museum at Swansea tells the story of industry and innovation in Wales, now and over the last 300 years.

  • Rhagor: Explore our collections

    Rhagor (Welsh for ‘more’) offers unprecedented access to the amazing stories that lie behind our collections.